This Window Control Unit allows modern day 1-touch up and down operation with options for even more convenience. It's compatible with all known 2-wire power window motors which require the electrical polarity to be reversed to reverse the direction of the window and it requires no calibration. This unit provides the same window control capability that's included with our Coach-1 complete car wiring system.
Momentary up/down switches are typically used to control power windows. To move a window up or down simply hold the switch in the up or down position to operate the window and release the switch to stop the window at the desired position.
For 1-Touch operation, quickly press and release the up/down switch and the window will automatically raise or lower a window to the top or bottom of the track. The window can be stopped anywhere along the track by quickly pressing and releasing the up or down switch again.
You can take advantage of other convenience features by connecting the Door Lock and Unlock inputs to a keyless entry system. In this case, when you press the Lock button twice on the keyfob both windows will automatically raise to the top of track. In addition, if you press the Unlock button twice, only window 1 (Driver's side) will automatically lower. This feature gives you an alternate way of getting in the vehicle in the event the doors fail to unlock.
The following options are included for certain hardtops and convertible applications where the windows must be dropped slightly in order to open and close the doors. A simple wire jumper will activate one of these powerful features.
Window Drop Option for Power Window Weather Seal Clearance
This option provides compatibility with vehicles where the windows must be dropped slightly to allow the doors to open. This may apply to convertibles or certain hardtops when the windows fit into a weather seal along the top. To use this option, you must connect the Door Lock and Unlock signal inputs to a keyless entry system (not included).
Entering a locked vehicle with windows raised: When the doors are unlocked by your keyless entry key fob both driver and passenger windows will be dropped slightly to allow the doors to open. When both doors are closed and the ignition key is turned on, the windows will automatically raise into the weather seal.
Exiting the vehicle: When the ignition key is turned off the windows will automatically drop slightly to allow the doors to open. After exiting the vehicle, use the key fob to lock the doors and the windows will automatically raise completely into the weather seal.
Independent Window Drop Option for Power Window Weather Seal Clearance
This special option is similar to the Power Window Drop feature described above where the windows must be dropped slightly in order to open the doors. However, this option allows the windows to be operated independently and automatically, OEM style, and does not rely on use of keyless entry system.
IMPORTANT: This option requires the driver and passenger dome light door switches to be integrated into the door latch mechanisms (Corvette latches are often used for this purpose) so that the dome light switch closes as soon as the door is unlatched. The driver and passenger door switches are wired separately to the Window Control Unit and used to trigger individual power window drop operation.
This kit includes an input cable, wires for power and ground, and wires for connecting directly to the window motors. Ring terminals and heat shrink tubing are also included.
Stud terminals are 8-32
Compact Size: 4.6" x 5.1" x 1.0" (LxWxH)
Powder coated aluminum case
