Wire Kit Parts & Accessories




Product Image Item Name+ Price
100 AMP MIDI (AMI) FUSE

100 AMP MIDI (AMI) FUSE

  •  High amp fuse for MIDI/AMI Fuse Holder •  Has time delay characteristics to handle temporary power surges •  Will maintain 150% of rating for 90 sec minimum, 200% of rating for 5 sec minimum
$3.30

Add:

CRIMP TOOL, OPEN BARREL

CRIMP TOOL, OPEN BARREL

  •  Crimp Tool for open barrel contacts (Delphi, PacCon) •  Crimps conductor and insulation wings •  Designed primarily for 14 - 20 ga but can be used for 10 - 12 ga terminals
$89.95

Add:

ELECTRONIC FLASHER, 2 PIN

ELECTRONIC FLASHER, 2 PIN

This 2 pin Electronic Flasher is designed to flash 1 to 6 standard SAE No. 1157 bulbs but our testing has shown that it also works with some 12VDC LED lamps. Load for 2 LED lamps, 1 front, 1 rear, should be 0.1 amp (1 Watt) minimum for typical turn signal application.
$8.62

Add:

FOOT DIMMER SWITCH

FOOT DIMMER SWITCH

  •  Floorboard mounted headlight dimmer switch •  Alternate action ON - OFF •  Includes mating connector and terminals •  Terminals are tin plated for extra corrosion resistance
$12.95

Add:

IGNITION SWITCH

IGNITION SWITCH

  •  Four Position Ignition Switch (Acc, Off, Ignition, Start) •  Marine grade brass construction for corrosion resistance •  Ignition and Accessory contacts rated for 15 amps, Start rated for 30 amps •  Mounting hole: 13/16" •  Overall length: 3-1/8" •  Diameter: 1-3/4"
$35.47

Add:

MASTER BATTERY DISCONNECT SWITCH

MASTER BATTERY DISCONNECT SWITCH

  •  Rated at 12VDC, 300A continuous, or 1000A for 90 sec •  Waterproof and dustproof to IP67 (immersible) •  Lockable in the OFF position provides extra security •  Protect vehicle from tampering, theft, and battery drain •  Composite engineering polymer housing will not rust or corrode •  Size approx 5-3/8" x 3" with...
$49.50

Add:

MIDI / AMI FUSE HOLDER

MIDI / AMI FUSE HOLDER

  Used for high amp primary fusing. Designed for 12 VDC MIDI / AMI automotive fuses up to 150 amps. Stackable module allows for multiple fuses (3 maximum) and compact size for efficient under-hood power distribution. Features #10-24 stainless steel studs and red EPDM santoprene cover. (FUSE MUST BE ORDERED SEPARATELY)   •  Size: 3-1/8" x  1-1/4" • ...
$6.32

Add: